Products

This is the perfect choice for Traxxas XRT users - this RC ESC supports is perfect with a Hobbywing Max6 ESC . With this ESC support , you can make the most of your RC experience Manufactured in Quebec , Canada

This Extra Sticky Thick grease is our most versatile grease. The perfect grease to put on your diff ring gear, your boat shaft, your bashers bearings etc. Sold in 60 grams jar. Grease made in Quebec, Canada.

KC RC single fan 28000RPM , 30x30x10mm - Plugged directly in your receiver.   * The RPM value is approximate. Made in China

KC RC single fan 18000RPM , 40x40x28mm - Plugged directly on your battery balance plug.  RPM infos : - 2s 12000 RPM - 3s 18000 RPM - 4s 18000 RPM - 6s 18000 RPM * The RPM value is approximate and depend to your type of battery ( number...

KC RC aluminium fan motor clip.   - Allow direct ventilation on the motor - For 40x40mm fan - Work with simple and double fan system  - Come with all screws needed.  * sold in pair.    Specifications : 36mm : - Most of 1:10 motors - Original Traxxas Maxx motor 2400KV...

The logo is print with a thick 0.6mm high quality PU material.  - Yupoog 6006 Classics Flat Bill Trucker Cap (Black, Navy or Charcoal)  ***  DO NOT PUT IN THE DRYING MACHINE !!! All Caps must be hang for drying.  Putting your cap in the drying machine may...

KC RC Front bumper for Traxxas Sledge  Specifications :  - Made with two pieces of UHMW , thick of 1/8 - UHMW is a plastic with a excellent abrasion resistance   - Rubber impact absorption piece. - Made to protect the hinge pin block.  * All screws...

This Shock Tower is made out of 5mm carbon fiber to make this part stronger.   Made in Québec, Canada.  

This Shock Tower is made out of 5mm carbon fiber to make this part stronger. Design with holes for ball screw, so this part eliminate the stock aluminum piece where the ball screw hold on. This is made to reduce weight.   -Fit on...

This Shock Tower is made out of 5mm carbon fiber to make this part stronger. Design with holes for ball screw, so this part eliminate the stock aluminum piece where the ball screw hold on. This is made to reduce weight.   -Fit on...

This Shock Tower is made out of 5mm carbon fiber to make this part stronger.   Made in Québec, Canada.  

This Shock Tower is made out of High Grade 7075 T6 aluminum, 4.75mm thick . Use the same holes geometry then the TKR9268E - 6g lighter then the 2.1 stock tower - Fit on TEKNO EB48 2.x - NB48 2.x  (Direct fit on EB48...

Front shock tower in 7075 T6  aluminium. Specifications : - Thickness :  6.35mm - Part 1.35mm thicker than stock or EXB (5mm) - Minimized material removal to make the part stronger.    Compatible with : - Kraton 6s EXB (RTR) ***ARA8708T1***  Comes with all the screws which...

Front shock tower in aluminium 7075 T6  Specifications : - Thickness :  6.5mm - Part 1.5mm thicker than stock or EXB (5mm) - Anodized in red for good protection against oxidation and a good look. - Minimized material removal to make the part stronger.  Compatible with : -...

Front shock tower in aluminium 7075 T6 for Traxxas Sledge Specifications : - Thickness :  6.5mm - Addition of material to weaker places - Original shock and turnbuckle geometry. - Aluminium 7075 T6     Made in Québec, Canada

Front shock tower in aluminium 7075 T6  Specifications : - Thickness :  6.5mm - Part 1.5mm thicker than stock or EXB (5mm) - Anodized in red for good protection against oxidation and a good look. - Minimized material removal to make the part stronger.  * Replace the part AR330377  Compatible...

Front shock tower in 7075 T6 aluminum Specifications : - Thickness :  6.35mm - Part 1.35mm thicker than stock or EXB (5mm) - Anodized for good protection against oxidation and a good look. (Not for the Raw) - Minimized material removal to make the part stronger.  Compatible with...

Front shock tower in aluminium 7075 T6  Specifications : - Thickness :  6.5mm - Part 1.5mm thicker than stock or EXB (5mm) - Anodized in red for good protection against oxidation and a good look. - Minimized material removal to make the part stronger.  Compatible with : -...

KC RC Gear cover for Traxxas Maxx Slash 6s   - Allow more room for the pinion gear.  - This gear cover, combine with our motor mount, allow you a bigger pinion gear.   Made in Quebec, Canada.

Gear cover for X-Maxx  - Made to protect the gears from the dust , rocks and sand - Fit perfectly with the Traxxas X-maxx chassis  - Tested for Spur gear as big as than Mod1 54t and Pinion Mod1 41T.   Made in Québec, Canada.  

KC RC HD Velcro straps are made of high quality Hook and Loop.  To offer the best velcro straps, they are backed with a high strength webbing. Those straps are perfect for mid size RC, such as Maxx, Maxx Slash, kraton 4s and 6s, ...

KC RC HD Velcro straps are made of high quality Hook and Loop.  To offer the best velcro straps, they are backed with a high strength webbing. Those straps are perfect for big RC, such as X-Maxx and other 1/5 scales.  

Our new HEKXA wall mounts are the best way to organise your RC space.   This HEKXA Double wall mount can be use to store 1/16 up to 1/8 RC.   Benefits of using KC RC wall mount : No flat spot on your tire....

Our new HEKXA wall mounts are the best way to organise your RC space.   This HEKXA Single wall mount can be use to store 1/16 up to 1/8 RC.   Benefits of using KC RC wall mount : No flat spot on your tire....

Our new HEKXA wall mounts are the best way to organise your RC space.   This HEKXA Triple wall mount can be use to store 1/16 up to 1/8 RC.   Benefits of using KC RC wall mount : No flat spot on your tire....

Our new HEKXA wall mounts are the best way to organise your RC space.   Benefits of using KC RC wall mount shelf : 9 x 13 1/2in shelf. Perfect to store your controller, small RC (GROOM), Oil bottles and more. Makes a nice...

Hinge Pin Block in 7075 T6 Aluminum for Traxxas Sledge Specifications : - Thickness :  6.35mm - 2x Thicker than original - Comes with Nylon pils with off set hole, to give you more adjustments. - Aluminium 7075 T6    *** THE ''A'' KC RC BLOCK ONLY FIT...

KC RC Motor and 40mm fan mount for Maxx Slash 6s and Maxx 4s    - M3 and M4 bolt patern for your big and small motors. (42mm diameter maximum)  - Extra bolt patern with 4mm higher for bigger pinion gear, when combine with...

Motor mount with bolt patern of 30mm. Specifications : - Perfect for 800kv motor and smaller. - Solid construction *The base is machined from a 3/4 thick block of 6061 T6 aluminum. *The vertical piece is machined from a block of 7075 T6 3/8 thick.  * Don't fit with Original...

Motor Plate 3s in aluminium 7075 T6 ( Replace ARA311032)  Compatible with : - Arrma Big Rock - Arrma Granite - Arrma Vorteks - Arrma Typhon - Arrma Senton - Arrma Kraton 4s - Arrma Outcast 4s  Specifications : - Aluminium 7075 T6 ( 6.35mm...

Motor Plate mount for Arrma 4s, in 7075 T6 aluminum ( Replace ARA311192)    Compatible with : - Arrma Mojave 4s - Arrma Kraton 4s (T3,T4 colors) -  Arrma Outcast 4s (T3,T4 colors)    Specifications : - Aluminium 7075 T6 ( 6.35mm ) - Stronger than original parts ....

Motor mount with bolt patern of 30mm. Specifications : - Perfect for 800kv motor and smaller. - Solid construction *The base is machined from a 3/4 thick block of 6061 T6 aluminum. *The vertical piece is machined from a block of 7075 T6 3/8 thick.  * Don't fit with Original Traxxas 1250Kv...

KC RC Motor/center diff support for Traxxas Sledge Specifications : - Extreme solid made -Use all originals holes, no other modifications needed . - Motor support and differential are 100% in aluminium 7075 T6  - Motor support by 2 clips, so the motor is not...

KC RC Single fan esc mounting plate 40x40mm. Compatibility : - Hobbywing Max5 - Hobbywing Max6 - Hobbywing Max8 / Team Corally Torox 185 - Spektrum 6s 150 Amp  - Spektrum 3s 85 Amp (Vortex 4x4 3s) - BLX100 2S/3S Waterproof* ESC    - Come with all...

This O-Ring grease is the perfect way to keep your o-ring in perfect condition and they won't come dry with when expose to sun and air. Putting this grease on your shocks O-rings will help with leaking oil. Sold in 10 grams jar.

36mm aluminum radiator ,for most 1:10 engine  Specifications : - Help to dissipate heat from the engine - A 40 x 40 mm fan can be mounted on. - 3 colors availables    

This Upgrade panel makes the KC RC Ajustable ramp sturdier.  (Clic on the Play button on the image to see a video with and without the reinforce panel) SPECIFICATIONS :    - 100% plastic (HDPE)  (plastic made in Quebec, Canada.) - 100% stainless steel...

Rear bumper for Traxxas Sledge 6s . Specifications : - Made with two layers of 1/8 thick UHMV - UHMW is a plastic with a excellent abrasion resistance . - Made to protect the hinge pin block. * All screws needed includes.  * This bumper is...

This Shock Tower is made out of 5mm carbon fiber to make this part stronger.   Made in Québec, Canada.  

This Shock Tower is made out of 5mm carbon fiber to make this part stronger. Design with holes for ball screw, so this part eliminate the stock aluminum piece where the ball screw hold on. This is made to reduce weight.   -Fit on...

This Shock Tower is made out of 5mm carbon fiber to make this part stronger. Design with holes for ball screw, so this part eliminate the stock aluminum piece where the ball screw hold on. This is made to reduce weight.   -Fit on...

This Shock Tower is made out of 5mm carbon fiber to make this part stronger.   Made in Québec, Canada.  

This Shock Tower is made out of High Grade 7075 T6 aluminum, 4.75mm thick . Use the same holes geometry then the TKR9269E - 9g lighter then the 2.1 stock tower - Fit on TEKNO EB48 2.x - NB48 2.x  (Direct fit on EB48...

Rear shock tower in aluminium 7075 T6  Specifications : - Thickness :  6.5mm - Part 1.5mm thicker than stock or EXB (5mm) - Anodized in red for good protection against oxidation and a good look. - Minimized material removal to make the part stronger.  Compatible with : -...

Rear shock tower in 7075 T6  aluminium. Specifications : - Thickness :  6.35mm - Part 1.35mm thicker than stock or EXB (5mm) - Minimized material removal to make the part stronger.    Compatible with : - Kraton 6s EXB (RTR) ***ARA8708T1***  Comes with all the screws which...

Rear shock tower in aluminium 7075 T6  Specifications : - Thickness :  6.5mm - Part 1.5mm thicker than stock or EXB (5mm) - Anodized in red for good protection against oxidation and a good look. - Minimized material removal to make the part stronger.  *Replace the part AR330189  Compatible...

Rear shock tower in aluminium 7075 T6 for Traxxas Sledge Specifications : - Thickness :  6.5mm - Addition of material to weaker places - Original shock and turnbuckle geometry. - Aluminium 7075 T6     Made in Québec, Canada.      

Rear shock tower in aluminium 7075 T6  Specifications : - Thickness :  6.5mm - Part 1.5mm thicker than stock or EXB (5mm) - Anodized in red for good protection against oxidation and a good look. - Minimized material removal to make the part stronger.  * Replace the part ARA330603...

Rear shock tower in 7075 T6 aluminum Specifications : - Thickness :  6.35mm - Part 1.35mm thicker than stock or EXB (5mm) - Anodized for good protection against oxidation and a good look. (Not for the Raw) - Minimized material removal to make the part stronger.  Compatible with :...

The logo is print with a thick 0.6mm high quality PU material.  - Richardson 7 Panel Flat Bill Cap (Red)  ***  DO NOT PUT IN THE DRYING MACHINE !!! All Caps must be hang for drying.  Putting your cap in the drying machine may crack the printed logo. ***