PARTS

KC RC Motor and 40mm fan mount for Maxx Slash 6s and Maxx 4s    - M3 and M4 bolt patern for your big and small motors. (42mm diameter maximum)  - Extra bolt patern with 4mm higher for bigger pinion gear, when combine with...

This KC RC Skid plate is made from 7075 T6 aluminum for ultimate protection and durability. The 6.35mm thickness provides strong protection against wear and tear while the skid plate design offers superior coverage for your Mojave 4s . Color : Silver Made in Quebec...

KC RC Wing washer for Traxxas Sledge in aluminium 7075 T6. Specifications : - Aluminium 7075 T6 / or carbon fiber - Thickness : 3.175 mm  (around 1/8 inch) - Can be install with the original screws.   Made in Québec, Canada.

KC RC Tower 2 Tower brace For Arrma Mojave 4s  Specifications : - Reinforce the complete vehicle assembly - Aluminium brace 7075 T6   Made in Quebec , Canada

KC RC Motor/center diff support for Traxxas Sledge Specifications : - Extreme solid made -Use all originals holes, no other modifications needed . - Motor support and differential are 100% in aluminium 7075 T6  - Motor support by 2 clips, so the motor is not...

KC RC Velcro batteries holder for Traxxas Sledge 6s and Maxx Slash 6s. This Battery holder system is the perfect choice for your batteries.  Don't be limited by the size of your batteries.  Hold perfectly the 4s, 2x 3s and 6s batteries. * Velcro...

This KC RC Skid plate is made from 7075 T6 aluminum for ultimate protection and durability. The 6.35mm thickness provides strong protection against wear and tear while the skid plate design offers superior coverage for your Kraton 4s v2.   Fit on chassis of the...

KC RC Gear cover for Traxxas Maxx Slash 6s   - Allow more room for the pinion gear.  - This gear cover, combine with our motor mount, allow you a bigger pinion gear.   Made in Quebec, Canada.

KC RC aluminum ESC mount for Maxx Slash 6s    - Bolts patern to mount Hobbywing Max8, Hobbywing Max6 and Castle Cobra 8 ESC.  - Screw in the chassis holes, for stock ESC. (NO drilling needed)  - Come with all screws needed.    Made...

Gear cover for X-Maxx  - Made to protect the gears from the dust , rocks and sand - Fit perfectly with the Traxxas X-maxx chassis  - Tested for Spur gear as big as than Mod1 54t and Pinion Mod1 41T.   Made in Québec, Canada.  

Motor Plate mount for Arrma 4s, in 7075 T6 aluminum ( Replace ARA311192)    Compatible with : - Arrma Mojave 4s - Arrma Kraton 4s (T3,T4 colors) -  Arrma Outcast 4s (T3,T4 colors)    Specifications : - Aluminium 7075 T6 ( 6.35mm ) - Stronger than original parts ....

Kc Rc Wing washer for XRT  Specifications : - Aluminium 7075 T6 / or carbon fiber - 3.175mm thick (around 1/8 in).   Made in Québec, Canada.

KC RC Velcro batteries holder for Traxxas XRT This Battery holder system is the perfect choice for your batteries.  Don't be limited by the size of your batteries, they are perfect for the 11000 Mah batteries. * Velcro straps included* Made in Quebec ,...

Rear shock tower in aluminium 7075 T6 for Traxxas Sledge Specifications : - Thickness :  6.5mm - Addition of material to weaker places - Original shock and turnbuckle geometry. - Aluminium 7075 T6     Made in Québec, Canada.      

KC RC Tower 2 Tower brace For Arrma Kraton 4s v2 Specifications : - Reinforce the complete vehicle assembly - Aluminium brace 7075 T6   Made in Quebec , Canada

This KC RC Skid plate is made from 7075 T6 aluminum for ultimate protection and durability. The 6.35mm thickness provides strong protection against wear and tear while the skid plate design offers superior coverage for your Big Rock, Senton, Infraction, Typhon, Vendetta 3s. Color...

Front shock tower in aluminium 7075 T6 for Traxxas Sledge Specifications : - Thickness :  6.5mm - Addition of material to weaker places - Original shock and turnbuckle geometry. - Aluminium 7075 T6     Made in Québec, Canada

Rear shock tower in aluminium 7075 T6  Specifications : - Thickness :  6.5mm - Part 1.5mm thicker than stock or EXB (5mm) - Anodized in red for good protection against oxidation and a good look. - Minimized material removal to make the part stronger.  *Replace the part AR330189  Compatible...

This KC RC Skid plate is made from 7075 T6 aluminum for ultimate protection and durability. The 6.35mm thickness provides strong protection against wear and tear while the skid plate design offers superior coverage for your Outcast 4s v2.   Fit on chassis of...

This motor cap is made to fit the VELINEON 1200XL on every motor mount possible. Specifications : - Fit motor mount with bolt patern of 25mm / 30mm - Fit stock motor mount - This aluminum cap act like an heatsink       Made in...

KC RC Tower 2 Tower brace For Arrma Vorteks 4x4 3s Specifications : - Reinforce the complete vehicle assembly - Aluminium brace 7075 T6 - All screws needed are included   Made in Québec, Canada

Front shock tower in aluminium 7075 T6  Specifications : - Thickness :  6.5mm - Part 1.5mm thicker than stock or EXB (5mm) - Anodized in red for good protection against oxidation and a good look. - Minimized material removal to make the part stronger.  * Replace the part AR330377  Compatible...

KC RC Tower 2 Tower brace For Arrma Outcast 4s v2 Specifications : - Reinforce the complete vehicle assembly - Aluminium brace 7075 T6 Made in Quebec , Canada

KC RC ON/OFF switch holder for Maxx Slash 6s (Hobbywing)    - The secure way to mount you Hobbywing ON/OFF switch  - Screw in the chassis hole.  (NO drilling needed)  - Come with all screws needed.    Made in Quebec, Canada.

KC RC Tower / Diff / Tower brace For Arrma Kraton 6s EXB (RTR)   - Reinforce the complete vehicle assembly - Brace in 7075 T6 Aluminium     Compatible with : - Kraton 6s EXB (RTR) ***ARA8708T1***   Made in Quebec , Canada

This Shock Tower is made out of 5mm carbon fiber to make this part stronger. Design with holes for ball screw, so this part eliminate the stock aluminum piece where the ball screw hold on. This is made to reduce weight.   -Fit on...

This Carbon fiber Steering top plate is design to be as prety as light weight and strong.   -Fit on TEKNO EB410  -Fit on TEKNO EB410.2 -Fit on TEKNO ET410  -Fit on TEKNO ET410.2   Made in Québec, Canada.  

This Shock Tower is made out of 5mm carbon fiber to make this part stronger. Design with holes for ball screw, so this part eliminate the stock aluminum piece where the ball screw hold on. This is made to reduce weight.   -Fit on...

This Shock Tower is made out of 5mm carbon fiber to make this part stronger. Design with holes for ball screw, so this part eliminate the stock aluminum piece where the ball screw hold on. This is made to reduce weight.   -Fit on...

  This 2mm carbon fiber chassis fit on EB410 - EB410.2 - ET410 - ET410.2   This light weight chassis is the perfect way to put your Tekno on a diet !  The 2mm chassis gives you a litle bit more flex to get more...

Motor mount with bolt patern of 30mm. Specifications : - Perfect for 800kv motor and smaller. - Solid construction *The base is machined from a 3/4 thick block of 6061 T6 aluminum. *The vertical piece is machined from a block of 7075 T6 3/8 thick.  * Don't fit with Original...

Hinge Pin Block in 7075 T6 Aluminum for Traxxas Sledge Specifications : - Thickness :  6.35mm - 2x Thicker than original - Comes with Nylon pils with off set hole, to give you more adjustments. - Aluminium 7075 T6    *** THE ''A'' KC RC BLOCK ONLY FIT...

This Shock Tower is made out of 5mm carbon fiber to make this part stronger. Design with holes for ball screw, so this part eliminate the stock aluminum piece where the ball screw hold on. This is made to reduce weight.   -Fit on...

This Carbon fiber center diff brace is design to be as prety as light weight and strong.   -Fit on TEKNO EB410  -Fit on TEKNO EB410.2 -Fit on TEKNO ET410  -Fit on TEKNO ET410.2   Made in Québec, Canada.  

KC RC Tower 2 Tower brace For Arrma Vendetta 3s Specifications : - Reinforce the complete vehicle assembly - Aluminium brace 7075 T6   Made in Quebec , Canada

This Carbon fiber battery holder is design to be as prety as light weight and strong.   -Fit on TEKNO EB410  -Fit on TEKNO EB410.2 -Fit on TEKNO ET410  -Fit on TEKNO ET410.2   Made in Québec, Canada.  

KC RC ESC support for Traxxas X-Maxx (HB Max5 and Castle XLX2) Specifications : - Bolt patern for HobbyWing Max5 and Castle XLX2 (Can put any other ESC with double sided tape. - Machined in 1/8 thick aluminium - Stainless screws includes - Aluminium...

Motor Plate 3s in aluminium 7075 T6 ( Replace ARA311032)  Compatible with : - Arrma Big Rock - Arrma Granite - Arrma Vorteks - Arrma Typhon - Arrma Senton - Arrma Kraton 4s - Arrma Outcast 4s  Specifications : - Aluminium 7075 T6 ( 6.35mm...

KC RC ON/OFF switch holder for Maxx Slash 6s (Castle)    - The secure way to mount you Castle ON/OFF switch  - Screw in the chassis hole.  (NO drilling needed)  - Come with all screws needed.    Made in Quebec, Canada.

This pack on 2 wing are made out of a premium 0.04in thick Polycarbonate plastic.   - Normal down force  - EXTRA Strong  - Pack of 2     - Fit on TEKNO  - Fit on TEAM ASSOCIATED - Fit on TLR - Fit on all other...

This pack on 2 wing are made out of a premium 0.04in thick Polycarbonate plastic.   - Maximize the down force, for more air control with heavy front vehicule, such TEKNO 1/10 buggies and truggies. - EXTRA Strong  - Pack of 2   -...

This Shock Tower is made out of 5mm carbon fiber to make this part stronger.   Made in Québec, Canada.  

This KC RC Skid plate is made from 7075 T6 aluminum for ultimate protection and durability. The 6.35mm thickness provides strong protection against wear and tear while the skid plate design offers superior coverage for your Granite and Vorteks 3s. Color : Silver Made...

KC RC ESC support for Traxxas XRT with Hobbywing Max5 ESC this is an ESC support specifically designed for the Traxxas XRT with the HW Max5. Its feature set allows for unparalleled control and power, giving you a smooth and precise driving experience. Manufactured in...

Motor mount with bolt patern of 30mm. Specifications : - Perfect for 800kv motor and smaller. - Solid construction *The base is machined from a 3/4 thick block of 6061 T6 aluminum. *The vertical piece is machined from a block of 7075 T6 3/8 thick.  * Don't fit with Original Traxxas 1250Kv...

KC RC Front bumper for Traxxas Sledge  Specifications :  - Made with two pieces of UHMW , thick of 1/8 - UHMW is a plastic with a excellent abrasion resistance   - Rubber impact absorption piece. - Made to protect the hinge pin block.  * All screws...

Rear bumper for Traxxas Sledge 6s . Specifications : - Made with two layers of 1/8 thick UHMV - UHMW is a plastic with a excellent abrasion resistance . - Made to protect the hinge pin block. * All screws needed includes.  * This bumper is...

This carbon fiber Wing Washer is perfect to hold your wing tight and be as prety as light weight.    - Fit Tekno 1/10 - Fit all 30mm wing bolt patern   Made in Québec, Canada.  

Rear shock tower in 7075 T6 aluminum Specifications : - Thickness :  6.35mm - Part 1.35mm thicker than stock or EXB (5mm) - Anodized for good protection against oxidation and a good look. (Not for the Raw) - Minimized material removal to make the part stronger.  Compatible with :...

Front shock tower in 7075 T6 aluminum Specifications : - Thickness :  6.35mm - Part 1.35mm thicker than stock or EXB (5mm) - Anodized for good protection against oxidation and a good look. (Not for the Raw) - Minimized material removal to make the part stronger.  Compatible with...