TRAXXAS PARTS

KC RC Wing washer for Traxxas Sledge in aluminium 7075 T6. Specifications : - Aluminium 7075 T6 / or carbon fiber - Thickness : 3.175 mm  (around 1/8 inch) - Can be install with the original screws.   Made in Québec, Canada.

KC RC Motor/center diff support for Traxxas Sledge Specifications : - Extreme solid made -Use all originals holes, no other modifications needed . - Motor support and differential are 100% in aluminium 7075 T6  - Motor support by 2 clips, so the motor is not...

KC RC Motor and 40mm fan mount for Maxx Slash 6s and Maxx 4s    - M3 and M4 bolt patern for your big and small motors. (42mm diameter maximum)  - Extra bolt patern with 4mm higher for bigger pinion gear, when combine with...

Kc Rc Wing washer for XRT  Specifications : - Aluminium 7075 T6 / or carbon fiber - 3.175mm thick (around 1/8 in).   Made in Québec, Canada.

Gear cover for X-Maxx  - Made to protect the gears from the dust , rocks and sand - Fit perfectly with the Traxxas X-maxx chassis  - Tested for Spur gear as big as than Mod1 54t and Pinion Mod1 41T.   Made in Québec, Canada.  

KC RC Velcro batteries holder for Traxxas Sledge 6s and Maxx Slash 6s. This Battery holder system is the perfect choice for your batteries.  Don't be limited by the size of your batteries.  Hold perfectly the 4s, 2x 3s and 6s batteries. * Velcro...

Front shock tower in aluminium 7075 T6 for Traxxas Sledge Specifications : - Thickness :  6.5mm - Addition of material to weaker places - Original shock and turnbuckle geometry. - Aluminium 7075 T6     Made in Québec, Canada

KC RC Velcro batteries holder for Traxxas XRT This Battery holder system is the perfect choice for your batteries.  Don't be limited by the size of your batteries, they are perfect for the 11000 Mah batteries. * Velcro straps included* Made in Quebec ,...

Motor mount with bolt patern of 30mm. Specifications : - Perfect for 800kv motor and smaller. - Solid construction *The base is machined from a 3/4 thick block of 6061 T6 aluminum. *The vertical piece is machined from a block of 7075 T6 3/8 thick.  * Don't fit with Original...

Rear shock tower in aluminium 7075 T6 for Traxxas Sledge Specifications : - Thickness :  6.5mm - Addition of material to weaker places - Original shock and turnbuckle geometry. - Aluminium 7075 T6     Made in Québec, Canada.      

KC RC Gear cover for Traxxas Maxx Slash 6s   - Allow more room for the pinion gear.  - This gear cover, combine with our motor mount, allow you a bigger pinion gear.   Made in Quebec, Canada.

Hinge Pin Block in 7075 T6 Aluminum for Traxxas Sledge Specifications : - Thickness :  6.35mm - 2x Thicker than original - Comes with Nylon pils with off set hole, to give you more adjustments. - Aluminium 7075 T6    *** THE ''A'' KC RC BLOCK ONLY FIT...

KC RC ON/OFF switch holder for Maxx Slash 6s (Hobbywing)    - The secure way to mount you Hobbywing ON/OFF switch  - Screw in the chassis hole.  (NO drilling needed)  - Come with all screws needed.    Made in Quebec, Canada.

KC RC aluminum ESC mount for Maxx Slash 6s    - Bolts patern to mount Hobbywing Max8, Hobbywing Max6 and Castle Cobra 8 ESC.  - Screw in the chassis holes, for stock ESC. (NO drilling needed)  - Come with all screws needed.    Made...

This motor cap is made to fit the VELINEON 1200XL on every motor mount possible. Specifications : - Fit motor mount with bolt patern of 25mm / 30mm - Fit stock motor mount - This aluminum cap act like an heatsink       Made in...

KC RC ESC support for Traxxas X-Maxx (HB Max5 and Castle XLX2) Specifications : - Bolt patern for HobbyWing Max5 and Castle XLX2 (Can put any other ESC with double sided tape. - Machined in 1/8 thick aluminium - Stainless screws includes - Aluminium...

KC RC single fan mount plate 40x40mm for stock Traxxas Sledge motor mount.  - Install on original motor mount (TRA9589).  - Come with all screws needed.    Made in Québec, Canada.

Motor mount with bolt patern of 30mm. Specifications : - Perfect for 800kv motor and smaller. - Solid construction *The base is machined from a 3/4 thick block of 6061 T6 aluminum. *The vertical piece is machined from a block of 7075 T6 3/8 thick.  * Don't fit with Original Traxxas 1250Kv...

KC RC ESC support for Traxxas XRT with Hobbywing Max5 ESC this is an ESC support specifically designed for the Traxxas XRT with the HW Max5. Its feature set allows for unparalleled control and power, giving you a smooth and precise driving experience. Manufactured in...

Rear bumper for Traxxas Sledge 6s . Specifications : - Made with two layers of 1/8 thick UHMV - UHMW is a plastic with a excellent abrasion resistance . - Made to protect the hinge pin block. * All screws needed includes.  * This bumper is...